Water Valve Actuator Extension Kit

The Water Valve Actuator is widely used to actuate reticulation valves as an extension to the BRAT1000 Battery Torque Tool. The Water Corporation of Western Australia as well as SA Water have been using this method for the past 2 years, now doing away with the manual back breaking T Bar system.

There are 3 types of kits depending on the torque you require to actuate the valves and the length you need. The first is for the domestic standard reticulation valves as follows:

Kit Number 1

• OMS001 Extension - 40mm square tube, 560mm long 3/4" drive
• OMS002 C Spanner - 45mm x 20mm tube, 670mm long, 40mm C
• OMS006 C Spanner extension - 50mm x 20mm tube, 600mm long

Kit Number 2

• OMS016 Extension - 50mm square tube, 680mm long 1" drive
• OMS002 C Spanner - 45mm x 20mm tube, 670mm long, 40mm C
• OMS006 C Spanner extension - 50mm x 20mm tube, 600mm long

Kit Number 3

• OMS005-1 Extension - 40mm square tube, 1270mm long 3/4" drive
• OMS002 C Spanner - 45mm x 20mm tube, 670mm long, 40mm C
• OMS006 C Spanner extension - 50mm x 20mm tube, 600mm long

The above does not include the battery tool BRAT1000 which is used to attach the extensions to and drive the valve.  Please phone one of friendly staff today to arrange a demonstration.