EDMO LPDT55/25

The EDMO LPDT55/25 is a low line jack, one of the smallest in the range. Its low-line design is for those situations where ground clearance is small. This feature is particularly useful for underground machinery and

any other equipment with low clearance such as water trucks.

The EDMO LPDT55/25 Jack is designed to be able to reach in 1700 mm under equipment. With a closed height of under 250 mm and a width of less than 350 mm. The LPDT55/25 has a lift capacity of 55 tonnes on the first stage with a stroke of 130 mm, and 25 tonne on the second stage with a stroke of a further 110 mm. With a further extension height 490mm plus a 200 mm extension. The Jack only requires air supply of around 100 psi for its operation. The unit is completely self- contained and is very easily maneuvered into position or around the workshop.

Safety is a feature of the LPDT55/25 having a pilot operated lowering control valve which requires the Jack to be pumped down thus providing protection against a free fall and gives complete control over the lowering process. When jacking, protection is provided against overloading by pressure relief valves. Protection is also provided in the unlikely event of tube or fitting failure
in the form of hydraulic fuses, which are activated by excessive flow such as a broken pipe or fitting.